7060 Product Series

In the 7060 series, wavy cellulose sheets with a wave height of 7 mm are placed on top of each other, and the wave direction of the two adjacent sheets constitutes an angle of 60 degrees (45/15) to each other (Figure 7). Because of its minimal pressure drop, this model is well-suited for applications that involve a high ventilation rate or airflow through the pad, such as gas turbine inlet air cooling. Given the lower saturation efficiency of this model compared to the

7060 model, it is recommended to use thicker pad when employing this model. These series are offered in different dimensions according to the customer’s order and based on the required cooling capacity. It is also possible to provide these series with a water distributor.